Gold University of Minnesota M. Skip to main content. University of Minnesota.
Driven to Discover.
DMD

Scientific Poster Session 1

Tuesday, April 10, 10:30-5:30
Pinnacle Ballroom, Graduate Minneapolis 

Scientific Poster Session Instructions
For 2018 Presenters
10:30 - 11:00 Poster Preview Session 1
(Pinnacle Foyer, Graduate Minneapolis)
Moderator: Erik Gaasedelen, Department of Surgery, University of Minnesota
Poster
#
Title Authors
1
"Design and Development of a Novel Drug Delivery Catheter for Atherosclerosis" DMD2018-6869 Sunandita Sarker, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Yiannis Chatzizisis, Cardiovascular Biology and Biomechanics Laboratory, Cardiovascular Division, Department of Internal Medicine, University of Nebraska Medical Center; Srivatsan Kidambi, Department of Chemical & Biomolecular Engineering, University of Nebraska-Lincoln; Benjamin Terry, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln
2
"Assessment of Intra and Inter-Observer Variability of Peripheral Arterial Tonometry Measurements" DMD2018-6801 Ashish Singal, Division of Cardiovascular Medicine, Lillehei Clinical Research Unit, Department of Medicine, University of Minnesota; Ziad Taimeh, Division of Cardiovascular Medicine, Department of Medicine, University of Minnesota; Gretchen Peichel and Dean Krueger, Division of Cardiovascular Medicine, Lillehei Clinical Research Unit, Department of Medicine, University of Minnesota; Peter Eckman and Uma Valeti, Division of Cardiovascular Medicine, Department of Medicine, University of Minnesota
3
"Characterization of Pulsatility and Temperature Profile during Reactive Hyperemic Response" DMD2018-6805 Ashish Singal, Clarence Ojo, and Rumi Faizer, Division of Vascular Surgery, Department of Surgery, University of Minnesota
4
"Vagus Nerve Stimulation for Blood Pressure and Heart Rate Regulation" DMD2018-6847 George O'Clock, Bruce KenKnight, and Elena Tolkacheva, Department of Biomedical Engineering, University of Minnesota
5
"The Application of Deep Learning for the Classification of Internal Human Cardiac Anatomy" DMD2018-6887 Erik Gaasedelen, Alex Deakyne, and Paul Iaizzo, Department of Surgery, University of Minnesota

 

11:00 - 11:30 Poster Preview Session 2
(Pinnacle Foyer, Graduate Minneapolis)
Moderator: Shannen Kizilski, Department of Mechanical Engineering, University of Minnesota
Poster
#
Title Authors
6
"Development of Epicardial Circulatory Assist Devices: Material Considerations" DMD2018-6891 Elaine Soohoo, Edgar Aranda-Michel, Molly Kaissar, and Dennis Trumble, Department of Biomedical Engineering, Carnegie Mellon University
7
"Identifying Properties for an Aortic Stent-Graft that Counteracts Hypertension" DMD2018-6907 Shannen Kizilski, Department of Mechanical Engineering, University of Minnesota; Omid Amili, Department of Aerospace Engineering and Mechanics, University of Minnesota; Filippo Coletti, Department of Aerospace Engineering and Mechanics, University of Minnesota; Rumi Faizer, Department of Surgery, University of Minnesota; Victor Barocas, Department of Biomedical Engineering, University of Minnesota
8
"Feasibility of Using a Printed Microstrip Antenna in Evaluation of Peripheral Microcirculation" DMD2018-6912 David Nelson, Mechanical Engineering Department, University of South Alabama; Saeed Latif and Chad Austin, Electrical and Computer Engineering Department, University of South Alabama; Jeremy Chatham, Mechanical Engineering Department, University of South Alabama
9
"Reduction of the Aortic Aneurysm Sac Pressure using Stent with Venturi Structure: A Numerical Study" DMD2018-6919 Mohammad Fazel Bakhsheshi, Jacob Loredo, and Mohammad Shariatzadeh, Department of Mechanical Engineering, University of British Columbia; Florian Vixege, Department of Engineering, University of Montpellier; Dana Grecov, Department of Mechanical Engineering, University of British Columbia
10
"Temperature Monitoring with Zero Heat Flux Technology in Comparison with Thermocouple Needle Probe during Selective Hypothermia" DMD2018-6930 Mohammad Fazel Bakhsheshi, Department of Mechanical Engineering, University of British Columbia; Lynn Keenliside, Imaging Program, Lawson Health Research Institute; Ting-Yim Lee, Imaging Research Laboratories, Robarts Research Institute, Imaging Program, Lawson Health Research Institute, Department of Medical Imaging and Biophysics, Western University

 

11:30 - 12:00 Poster Preview Session 3
(Pinnacle Foyer, Graduate Minneapolis)
Moderator: Corey Cruttenden, Department of Mechanical Engineering, University of Minnesota
Poster
#
Title Authors
11
"Multiscale Entropy Technique Discriminates Single Lead ECG’s with Normal Sinus Rhythm and Sleep Apnea" DMD2018-6948 Suganti Shivaram, Department of Radiology, Mayo Clinic; Anjani Muthyala, Zahara Meghji, and Susan Karki, Department of Cardiovascular Medicine, Mayo Clinic; Shivaram Poigai Arunachalam, Department of Radiology, Mayo Clinic
12
"Biomechanical Responses of Swine Esophagus Tissue to Irreversible Electroporation" DMD2018-6963 Lars Mattison, Department of Biomedical Engineering, University of Minnesota; Chloe Johnson, Department of Biological Sciences, University of Minnesota; Paul Iaizzo, Department of Surgery, Institute for Engineering in Medicine, University of Minnesota
13
"Coronary Stenosis Measurements using K–Means Clustering" DMD2018- 6968 Farhad Akhbardeh, Department of Computer Science, University of North Dakota; Hasan Demirel, Department of Electrical and Electronic Engineering, Eastern Mediterranean University
14
"Cranial Prostheses for Pan-Cortical Neural Interfacing" DMD2018-6901 Leila Ghanbari, Department of Mechanical Engineering, University of Minnesota; Russel Carter, Department of Neuroscience, University of Minnesota; Matthew Rynes, Department of Biomedical Engineering, University of Minnesota; Judith Dominguez, Department of Mechanical Engineering, University of Minnesota; Jay Hu, Department of Biomedical Engineering, University of Minnesota; Nahom Mossazghi and Timothy Ebner, Department of Neuroscience, University of Minnesota
15
"An MRI Compatible Brain Probe for Signal Recording and Deep Brain Stimulation" DMD2018-6951 Corey Cruttenden and Mahdi Ahmadi, Department of Mechanical Engineering, University of Minnesota; Xiao-Hong Zhu and Wei Chen, Center for Magnetic Resonance Research, University of Minnesota; Rajesh Rajamani, Department of Mechanical Engineering, University of Minnesota

 

2:00 - 2:30 Poster Preview Session 4
(Pinnacle Foyer, Graduate Minneapolis)
Moderator: Erik Zavrel, Department of Biomedical Engineering, Cornell University
Poster
#
Title Authors
16
"Principles of Computer Numerical Control applied to Small Research Animal Surgical Procedures" DMD2018-6959 Mathew Rynes and Leila Ghanbari, Department of Mechanical Engineering, University of Minnesota; Jay Jia Hu, Department of Biomedical Engineering, University of Minnesota; Daniel Sousa Schulman, Gregory Johnson, and Michael Laroque, Department of Mechanical Engineering, University of Minnesota; Suhasa Kodandaramaiah, Department of Mechanical Engineering and Biomedical Engineering, University of Minnesota
17
"Design and Validation of an Organizational Device for Endourological Surgery" DMD2018-6839 Michael Tradewell, Medical School, Department of Biomedical Engineering, University of Minnesota; Steve Morin, Veterans Affairs Health Care System; Kristin Chrouser, Veterans Affairs Health Care System, Department of Urology, University of Minnesota
18
"Flexible Template to Assist MRI-guided Biopsy on Prostate Cancer" DMD2018-6909 Rui Li, School of Electrical and Computer Engineering, University of Georgia; Sheng Xu, Ivane Bakhutashvili, Bradford Wood, and Zion Tse, Center for Interventional Oncology Radiology and Imaging Sciences, NIH Clinical Center, National Institute of Biomedical Imaging and Bioengineering, National Cancer Institute Center for Cancer Research, National Institutes of Health
19
"A Simple Aspect Ratio Dependent Method of Patterning Microwells for Selective Cell Attachment" DMD2018-6811 Erik Zavrel and Michael Shuler, Department of Biomedical Engineering, Cornell University; Xiling Shen, Department of Biomedical Engineering, Duke University
20
"Toward a Microfluidic Implementation of a Digital Potentiometer" DMD2018-6812 Erik Zavrel, Department of Biomedical Engineering, Cornell University; Xiling Shen, Department of Biomedical Engineering, Duke University

 

2:30 - 3:00 Poster Preview Session 5
(Pinnacle Foyer, Graduate Minneapolis)
Moderator: Ye Zhang, Department of Mechanical Engneering, University of Minnesota
Poster
#
Title Authors
21
"Rewarming of Vitrified Heart Valves Using Magnetic Iron Oxide Nanoparticles" DMD2018-6929 Zhe Gao, Department of Engineering, University of Minnesota, Department of Chemistry, University of Minnesota; Zonghu Han, Department of Engineering, University of Minnesota; Kelvin Brockbank, Department of Bioengineering, Clemson University, Tissue Testing Technologies LLC; John Bischof, Department of Engineering, University of Minnesota
22
"Miniature Coupled Inductor Coils Enable Remote, Wireless and Secure Product Authentication" DMD2018-6888 Dean Myers, Michael Davis, and Peter Ladwig, Hutchinson Technology Inc.
23
"An Instrumented Urethral Catheter with Supercapacitor Based Force Sensor" DMD2018-6904 Ye Zhang, Mahdi Ahmadi and Rajesh Rajamani, Department of Mechanical Engneering, University of Minnesota
24
"Real-Time Robust 3d Plane Extraction for Wearable Robot Perception and Control" DMD2018-6964 Ran Duan and Shuangyue Yu, Department of Mechanical Engineering, City College of New York; Guang Yue, Kessler Foundation and Rutgers University New Jersey Medical School; Richard Foulds, Department of Biomedical Engineering, New Jersey Institute of Technology; Chen Feng, Mitsubishi Electric Research Labs; Yingli Tian, Department of Electrical Engineering, City College of New York; Hao Su, Department of Mechanical Engineering, City College of New York
25
"Finite Element Analysis and Experiment on Large Intestine End-To-End Anastomosis" DMD2018-6832 Ai Liao-yuan, Ge Shu-chen, Xu Jing-jing, LI Ming-yang, Mao Lin, and Song Cheng-li, Shanghai Institute for Minimally Invasive Therapy School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology

 

3:00 - 3:30 Poster Preview Session 6
(Pinnacle Foyer, Graduate Minneapolis)
Moderator: SIsaac Smithee, Department of Mechanical Engineering, South Dakota State University
Poster
#
Title Authors
26
"Fracture Toughness Characterization and Mixed-Mode Fracture Finite Element Modeling for Accurate Biopsy Needle Cutting Force Prediction" DMD2018-6834 Ng Si Yen, Guan-Jhong Lan, and Chi-Lun Lin, National Cheng Kung University
27
"Finite Element Modeling and Analysis of Ventricular Septal Defect Occluders" DMD2018-6837 Yiming Li, Shanghai Institute for Minimally Invasive Therapy, School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology and Department of Assets Management, Xinhua Hospital Affiliated to Shanghai Jiaotong University School of Medicine; Kun Sun, Department of Pediatric Cardiology, Xinhua Hospital Affiliated to Shanghai Jiaotong University School of Medicine; Chengli Song, Shanghai Institute for Minimally Invasive Therapy, School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology
28
"Stent Fracture Predictions with Peridynamics" DMD2018-6866 Alex Vasenkov, Sunergolab, Inc.
29
"Examination of Fluid-Structure Interaction in Stent Grafts and its Hemodynamic Implications" DMD2018-6872 Eric Looyenga and Stephen Gent, Department of Mechanical Engineering, South Dakota State University
30
"Computational Fluid Dynamics Modeling of Blood as a Heterogeneous Fluid" DMD2018-6873 Isaac Smithee and Stephen Gent, Department of Mechanical Engineering, South Dakota State University

 

4:00 - 4:30 Poster Preview Session 7
(Pinnacle Foyer, Graduate Minneapolis)
Moderator: Mikayle Holm, Department of Biomedical Engineering, University of Minnesota
Poster
#
Title Authors
31
"Computational Simulations of Ventricular Outflow Tract Obstructions Associated with Varied Replacement Valve Geometries" DMD2018-6916 Jorge Zhingre Sanchez and Lars Mattison, Department of Biomedical Engineering, University of Minnesota; Michael Bateman and Paul Iaizzo, Department of Surgery, University of Minnesota
32
"Molecular Analysis of Polymeric Nanocomposites on Prosthesis Design" DMD2018-6934 Norma-Aurea Rangel-Vázquez, Department of Chemistry, University of Minnesota and Department of Posgrade, Instituto Tecnológico de Aguascalientes; Juan-Ramón Campos-Cruz, Department of Posgrade, Instituto Tecnológico de Aguascalientes; Jonathan Kalla, Department of Chemistry, PCC
33
"Study of the Adsorption of Glibenclamide/Metformine in Hydrogels Using PM6 Model" DMD2018-6935 Norma-Aurea Rangel-Vázquez, Department of Chemistry, University of Minnesota and Department of Posgrade, Instituto Tecnológico de Aguascalientes; Nancy Delgadillo-Armendariz, Department of Posgrade, Instituto Tecnológico de Aguascalientes; Jonathan Kalla, Department of Chemistry, PCC
34
"Using WebGL for Teaching Bone Identification" DMD2018-6966 Mikayle Holm, Department of Biomedical Engineering, University of Minnesota; Erik Gaasedelen, Bioinformatics and Computational Biology, University of Minnesota; Paul Iaizzo, Department of Biomedical Engineering, Bioinformatics and Computational Biology, and Surgery, University of Minnesota
35
"Isometric Quadriceps Strength Test Device to Improve the Reliability of Handheld Dynamometry in Patient with Anterior Cruciate Ligament Injury" DMD2018-6848 Stephanie McNamara, Elizabeth Gallardo Hevia, Reggie St. Louis, and William Cho, John A. Paulson School of Engineering and Applied Science, Harvard University; Sangjun Lee, Martina Moyne, Brendan Quinlivan, Christopher Payne, and Conor Walsh, John A. Paulson School of Engineering and Applied Science, Harvard University and Wyss Institute for Biologically Inspired Engineering; Greg Schiller, Department of Physical Therapy and Athletic Training, Boston University; Louis Awad, Wyss Institute for Biologically Inspired Engineering and Department of Physical Therapy and Athletic Training, Boston University

 

4:30 - 5:00 Poster Preview Session 8
(Pinnacle Foyer, Graduate Minneapolis)
Moderator: Hilary Johnson, Department of Mechanical Engineering, MIT
Poster
#
Title Authors
36
"A Novel Lead Garment Structural System to Alleviate Orthopedic Stress for Surgeons" DMD2018-6920 Hilary Johnson and Sally Miller, Department of Mechanical Engineering, MIT; Prianca Tawde, Bain and Company; Bethany LaPenta, Harvard Extension School; Daniel Teo, Singapore Institute of Manufacturing Technology; Thomas Cervantes, Stanford University, School of Medicine; Nishaki Mehta, University of Virginia, School of Medicine; Alexander Slocum, Department of Mechanical Engineering, MIT
37
"Combination Product Patient Training: Howare Patients Trained and Who Conducts the Training?" DMD2018-6956 Virginia Lang and David Nalan, HirLan Inc: HirLan Institute of Human Factors
38
"Optimization of Surface Scaffold Morphology and Structure Using Taguchi’s Design of Experiments" DMD2018-6813 Aishwarya Bhargav, Department of Mechanical Engineering, National University of Singapore; Vinicius Rosa, Faculty of Dentistry, National University of Singapore; Lu Wen Feng and Jerry YH Fuh, Department of Mechanical Engineering, National University of Singapore
39
"Design and Verification of a Reloadable Adrenaline Auto-Injector for Intramuscular Injections" DMD2018-6944 Gokul Nair, Medical Devices Lab, Division of Bio-Medical Engineering, UCT Research Centre of Exercise Science and Sports Medicine [HPALS], Department of Human Biology, University of Cape Town South Africa; Michael Levin, Division of Asthma and Allergy, University of Cape Town; Sudesh Sivarasu, Medical Devices Lab, Division of Bio-Medical Engineering, UCT Research Centre of Exercise Science and Sports Medicine [HPALS], Department of Human Biology, University of Cape Town South Africa
40
"'Air Slicer' for Immersive Visualization of Medical Images" DMD2018-6870 Hossein Dehghani, Sumit Laha, Pankaj Kulkarni, Pradipta Biswas, Ulas Bagci, and Sang-Eun Song, University of Central Florida

 

5:00 - 5:30 Poster Preview Session 9
(Pinnacle Foyer, Graduate Minneapolis)
Moderator: Thomas Secord, Department of Mechanical Engineering, University of St. Thomas
Poster
#
Title Authors
41
"A High Efficiency Tunable Resonance Pump for Biomedical Applications" DMD2018-6917 Thomas Secord and Milad Audi, Department of Mechanical Engineering, University of St. Thomas
42
"Preliminary Investigation of the Mechanics of a Novel Thoracic Cavity Extra Pulmonary Oxygenation Device" DMD2018-6908 Fariba Aghabaglou, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Keely Buesing, Department of Surgery, University of Nebraska Medical Center; Nathan Legband, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Connor Slagle, Department of Mechanical Engineering, University of Colorado, Boulder; Wanchuan Xie, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Mark Borden, Department of Mechanical Engineering, University of Colorado, Boulder; Craig Kreikemeier-Bower, Institutional Animal Care Program, University of Nebraska-Lincoln; Benjamin Terry, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln
43
"An In Silico Investigation of a Lobe-Specific Targeted Pulmonary Drug Delivery Method" DMD2018-6928 Yu Feng, School of Chemical Engineering, Oklahoma State University; Xiaole Chen, School of Energy and Environment, Southeast University; Mingshi Yang, Department of Pharmacy, University of Copenhagen
44
"An Attempt to Improve Stance Mechanics of Trans-Tibial Amputee Gait by the Design of a Modular Ankle Joint Prosthetic" DMD2018-6945 Alastair During and Sudesh Sivarasu, Medical Devices Lab, Division of Biomedical Engineering, UCT Research Centre of Exercise Science and Sports Medicine [HPALS], Department of Human Biology, University of Cape Town, South Africa; George Vicatos, Department of Mechanical Engineering, University of Cape Town

 

* All accepted papers will be published in the Proceedings of the Design of Medical Devices Conference in the ASME Digital Collection, and will also be published as a printed book by ASME Press. Date of publication coming soon!

Register Now


Stay connected with the DMD Conference through LinkedIn Twitter Facebook Icon G+ YouTube